In the process of using paint roller roller, it is likely to cause peeling of the wall during the painting process for some reasons. In order to better and faster application and prevention, let's take a look at how to do it, and quickly analyze it with Jinbang Paint!
1. Generally, it is necessary to carry out cloth pasting on the load-bearing beam. You can try to use faster wall cloth or milky white natural latex, or grid cloth, and the grid cloth of its kind will have the actual effect of faster anti-crack fiber.
2. Applying waterproof putty can improve the adhesion between the base layer and the base layer, effectively prevent the occurrence of dents or broken shells, and then replace the hand-made roughening process, thus saving a lot of time and energy.
3. The wall must be leveled. The uneven wall must be leveled. For the uneven area of the wall, the ground can be leveled with putty powder first, so that the wall deviation does not need to exceed 3mm. If there are internal and external corners or the internal and external corners are not correct, they should be smoothed with ripe stone and then straightened.
4. Putty with high particle size and hard material shall be selected for seasoning, and the putty shall be approved three times. One time is thinner than the other, mainly to better collect light sources and make the wall look more bright and clean.
5. In the process of developing the finishing coat process, the artistic paint roller roller must be evenly wiped. If there are many architectural coatings on the wall, a little water can be added to the finishing coat, which can ensure the uniform roller roller.
6. It is likely that there will be some defects after the putty is applied. Generally, after the paint is applied once, the leveling must be carried out.
7. Do not add too much water to the paint, or it will directly affect the thickness, touch and strength of the paint layer. Try to select faster special tools. The main thing is to pay attention to the corner of the lower wall. Every time the roller paint roller is applied, the overlap in the middle and the paint orientation must be applied twice.